| Performance Characteristics | 4,000 | 10,000 | 20,000 |
| Vacuum rating (seconds/cubic inch) | .100 | .050 | .020 |
| Vacuum reservoir (cubic inches) | 28 | 80 | 2,700 |
| Vacuum level | 24 | 26 | 28 |
| Physical Dimension | |||
| Height | 17" | 42" | 42" |
| Width | 11" | 18" | 18" |
| Depth | 7" | 24" | 28" |
| Weight | 33lbs | 150lbs | 180lbs |
| Utility Requirements | |||
| Voltage | 110V | 110V | 220/50-60 / 480/3/50-60 |
| Amp Draw | 2 Amps | 2 Amps | 4 Amps / 2 Amps |
| Compressed Air | 17cfm @65psi | 32cfm @65psi | Servo Motor
|
Standard Features
Control
Custom microprocessor allows for precise control of vacuum and blowback functions. Vacuum control can be adjusted to 1/10th of a second, eliminating flash and improving part quality.
Limit Switches
One set of limit switches are provided. 1st (mounted on platen) is energized at mold closed (vacuum). The second switch is energized at mold full open (blowback).
Vacuum Circuit
Eliminates part burns voids and short shots; Reduces reject rates and improves part quality. Vacuum cycle can be adjusted from 0-24"hg.
Vacuum Reservoir
All units are designed with a vacuum reservoir which is discharged at mold closed. This feature provides an instant vacuum within the mold.
Blowback Circuit
The patented two-phase blowback assists in part ejection (1st phase) and purges vented pins (2nd phase). Purging of the vent pins reduces mold maintenance and increases productivity.
For Technical support, call 630.761.9898
